MD-43253

KAMAZ 43253 or analogue

Chassis:

8 m³

Tank volume:

4х2

Wheel formula:

4.5 (6.5) m³

Bunker volume:
MD-43253 - a modern, combined road vehicle of the medium-capacity class of domestic production, which allows you to carry out a range of road maintenance work at any time of the year.
For winter For summer

Description

Depending on the configuration of the removed technological equipment, the machine has many versions. This machine is approached by the entire line of urban rotary dumps, as well as most of the other quick-detachable and hinged equipment. Hydraulic drive of the machine ensures operation of all mounted equipment. Hinged equipment is connected to the machine hydraulic system using quick-release connections. All mounted equipment is controlled using the control panel of the machine located in the cockpit. In the basic configuration, the road special vehicle & nbsp; is equipped with a standard control system for mounted equipment with control from the driver's cab.

In winter, the combined road machine MD-43253  is designed to clean the roadway of fresh snow, remove roll, shuga, distribution of sand and salt.

Sand spreading equipment
The hopper is made of an all-bent sheet of low alloy steel or stainless steel. The geometry of the body of the European section, reinforced by stiffeners, prevents the hanging of anti-icing materials. The design of the hopper allows you to install one of two types of chains (bushing-roller or unattended with cast links) on a conveyor with a reduction gear drive BERMA RT-500

Bunker spreader
It is made of low-alloy steel or stainless steel and has the following mechanical adjustments in the standard version:
- distribution asymmetry system PGM in horizontal plane (rotation of spreading disk)
- adjustment of distribution width SGM in vertical plane (change of scattering disk inclination angle)
- adjustment of the spreader

During the summer period, the combined road vehicle is MD-43253 designed to sweep and wash the roadway, fences, road signs and track elements.

Watering equipment
The equipment capacity is made of steel or plastic cassette tanks with a pump in the basic configuration of NC 60/125.
KAMAZ 43253 or any imported analog
Spreader disc and feed system of PGM made of stainless steel
Conveyor chain in protective casings and unloaded from the pressure of the PGM

Reliability and efficiency

Power take-off
Power take-off

from the flywheel of the engine with the ability to switch the gearbox in motion with the attached equipment running

Hopper without welding
Hopper without welding

hopper walls made of solid bent metal sheet

Electrician
Electrician

the equipment is connected to the vehicle with a reliable, metal, sealed connector

PGM feed conveyor
PGM feed conveyor

with closed-type bearings removed from the PGM mixture zone and a protective tunnel where the chain passes

Cast Conveyor Chain
Cast Conveyor Chain

with a lifetime guarantee against breaking the chain links

Stiffening rib
Stiffening rib

increased number of stiffeners provides resistance to deformation

Hopper shot blasting
Hopper shot blasting

provides the quality of painting and anti-corrosion protection

Two-layer painting
Two-layer painting

painting the bunker with a special primer and paint based on epoxy resins will protect the bunker from the effects of the reagent for 7 years

Advantages

преимущества
Dose of PGM

Dose of PGM

from 5 to 500 g / m³ allows you to work with all types of material

Liquid chloride wetting system

Liquid chloride wetting system

Liquid materials are dosed directly onto the spreading disc from the outside of the distributor chute

Asymmetric distribution system

Asymmetric distribution system

The electronic system for changing the width of the distribution of the PGM allows you to effectively handle the entire width of the roadway, including its widening and narrowing

Hydraulic tracking with blade and central brush

Hydraulic tracking with blade and central brush

Provides effective cleaning of the roadway, eliminating skips when changing the relief

Obstacle clearance with blade and central brush

Obstacle clearance with blade and central brush

The hydraulic system of the machine includes components (safety valves, hydraulic accumulators, etc.) that reliably protect the equipment of the machine from damage due to collision or impact with obstacles (hatches, barriers, speed limiters, etc.)

Number of conveyor scrapers

Number of conveyor scrapers

Every second link of the cast conveyor chain is equipped with a scraper, which ensures an even supply of PGM to the spreading disc

Optional equipment

Attachments for operating the machine in the winter season:
- front swivel blades;
- front combined blades with retractable steel knives;
- front high-speed dumps;
- side blade;
- medium grader knife;
- front brush;
- medium brush;
- rear rotary brush.

 Attachments for operating the machine in the summer season:
- frontal washing unit with high pressure nozzles and high pressure gun for washing road signs, etc .;
- front brush;
- washing of barriers.
Delivery time from stock or up to 20 days Delivery time from stock or up to 20 days
12 months attachment warranty 12 months attachment warranty
Sell directly from the factory Sell directly from the factory
Train the operator to work with the machine Train the operator to work with the machine

Other combined road cars

MD-С41R1
City MD-С41R1

KDM light series on a 4x2 chassis for year-round maintenance of roads.

MD-53605
City MD-53605

Medium-series KDM on a 4x2 chassis for year-round maintenance of roads.

Delivery across Russia

Delivery across Russia

We deliver the technician to any region of the Russian Federation

Service and Repair

Service and Repair

Attachments, spare parts and repairs in the regions

Selling in the regions

Selling in the regions

Moscow, St. Petersburg, Voronezh, Krasnodar and another 21 centers throughout Russia

Lease terms

Lease terms

Sberbank, Ministry of Industry and Trade, Baltic Leasing, Element Leasing